Snap-On EETA308D User Manual

SAFETY
WARNING
Risk of Personal injury
• Do not apply over 150 VAC (RMS) or DC.
• Do not change the battery while the
instrument is attached to a power
source. Make sure the unit power is
“OFF” before opening the battery
compartment.
• Keep yourself, test leads, clothing,
and other objects clear of electrical
connections and hot or moving
engine parts.
• Do not use if the probe or any part of the
probe (including the lead and connectors)
appear to be damaged or if a malfunction of
the instrument is suspected.
WARNING
Risk
of electrical shock
• This product is intended for Measurement
Category I (for example, automotive 12V
systems). Do not use it for Measurement
Categories II, III, and IV.
• Measurement Category I is for measurements
performed on circuits not directly connected to
MAINS or MAINS circuits (an example of
MAINS circuit is 120VAC or 240VAC
household or industrial circuits.
• Do not connect this product to MAINS or
MAINS circuits
• Do not exceed voltage limits between inputs
as indicated on the rating label.
• Use extreme caution when working with
circuits that have greater than 40 VAC or 24
VDC
• Do not connect to damaged or un-insulated
conductors.

Snap-On EETA308D Specifications

General

Brand	Snap-On
Model	EETA308D
Category	Test Equipment
Language	English