Need help?Do you have a question about the Snap-On TECHANGLE ATECH1FR240B and is the answer not in the manual?
General| Model | ATECH1FR240B |
|---|---|
| Brand | Snap-On |
| Category | Power Tool |
| Drive Size | 1/2 inch |
| Torque Range (ft-lb) | 12.5-250 ft-lb |
| Angle Range | 0-360 degrees |
| Units | ft-lb, in-lb, Nm |
| Ratchet Teeth | 80 |
| Type | Electronic Torque Wrench |
| Torque Range (in-lb) | 150-3000 in-lb |
| Accuracy | ±2% CW & ±3% CCW @ 20-100% of full scale |
| Battery Type | Lithium-ion |
Essential safety warnings for operating the torque wrench.
Warning regarding electrical shock risks due to the tool's construction.
Technical details on head type, display characteristics, and button pad functions.
Overview of operational functions and accuracy specifications.
Physical dimensions, weight, and preset torque/angle ranges.
Guide to initial setup, power-on sequence, and mode selection.
Step-by-step guide for setting target, units, and applying torque.
Procedure for applying torque and recalling peak torque readings.
Step-by-step guide for setting target angle and performing angle zeroing.
Procedure for applying torque and rotating for angle measurement.
How to view the last recorded peak angle value.
Manages cycle count, main menu access, and display language.
Procedure to set the wrench head length for accurate measurements.
Details on using negative offsets for adapters and extensions.
Steps to view and clear recorded torque and angle data from memory.
Guide to configuring and saving target torque and angle presets.
How to modify or remove existing saved presets.
How to enter advanced settings and configure sleep time.
Adjusting LCD contrast, key beeps, and auto backlight.
Configures the backlight to stay on or turn off after a button press.
Configuring vibrator alerts and selecting battery type.
Configuring mode setup and accessing advanced configuration.
Setting up and using the Torque THEN Angle measurement mode.
Procedure to clear all configured presets from the wrench.
Accessing calibration and setting the wrench's real-time clock.
Setting the interval for calibration reminders.
Procedures for battery replacement and understanding memory status.
Common issues and their solutions for wrench operation.
Information on using adapters, maintenance, and service.
Details on EC and UK declarations of conformity.
List of authorized Snap-on repair centers worldwide.
To Next Page