Need help?Do you have a question about the Snap-On TECHANGLE ATECH2FR100B and is the answer not in the manual?
General| Model | ATECH2FR100B |
|---|---|
| Brand | Snap-On |
| Type | Electronic Torque Wrench |
| Torque Range | 5-100 ft-lb |
| Resolution | 0.1 ft-lb |
| Battery | 2 AA batteries |
| Drive Size | 3/8" |
| Angle Accuracy | ±1° |
| Operating Modes | Torque, Angle |
| Units | ft-lb, in-lb, Nm |
| Torque Accuracy | ±2% CW, ±3% CCW |
A quick guide to the fundamental operations and controls of the wrench.
Step-by-step instructions for powering on and initializing the wrench.
Procedure to access and review recorded torque and angle measurements.
Step-by-step guide to adding a new torque preset value.
Guide to modifying the parameters of a stored preset.
Activates or deactivates the Torque THEN Angle measurement sequence.
To Next Page