Snap-On TECHANGLE STEEL MICRO User Manual

22
Note: When Replace Battery screen is displayed wrench will no longer operate until battery is
replaced. Only POWER button functions which immediately turns off wrench.
 Memory Indicators
UNSCREW END CAP
INSERT NEW CELL
NEGITIVE (-) END
INTO END CAP
REPLACE BATTERY
REPLACE
BATTERY
DATA IN
MEMORY
MEMORY
FULL
MEMORY
ERROR
Less than 50 torque and angle records
stored in memory.
50 torque or angle records stored in memory. Oldest record will
be replaced by next record.
Memory read or write error. Return to Snap-on Repair Center if
persists after clearing memory.
LOW BATTERY
100%
BATTERY
LEVEL
50% BATTERY
LEVEL
LOW BATTERY

Snap-On TECHANGLE STEEL MICRO Specifications

General

Brand	Snap-On
Model	TECHANGLE STEEL MICRO
Category	Power Tool
Language	English