Snapper 2690980 User Manual

Adjusting the Mower Cutting Height
Use the height-of-cut switch to raise or lower the mower
cutting height (see Features and Controls).
Press the switch UP to raise the mowing cutting height and
DOWN to lower the mower cutting height. The height-of-cut
is disp_ayed on the electronic dashboard.
Parking Brake
Use the parking brake control to engage or disengage the
parking brake when the tractor is stopped (Features and
Controls).
Engage the Parking Brake - To engage the parking brake,
fully depress the brake pedal, pull UP on the parking brake
control, and release the brake pedal
Disengage the Parking Brake - To disengage the parking
brake, fully depress the brake pedal, press DOWN on the
parking brake control, and release the brake pedal
Cruise Control
TO ENGAGE:
1. Depress the forward ground speed pedal (see Features
and Controls),
2. Pull up the cruise control when the desired speed ms
reached. The cruise will lock inone ol itsfive locking
positions.
TO DISENGAGE:
1. Depress the brake pedal.
OF{
2. Depress the forward ground speed pedal.
Stopping the Tractor and Engine
WARNING
Fuel and itsvapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
Do not choke the carburetor to stop the engine.
1. Release the ground speed pedals to return to the
NEUTRAL position (see Features and Controls).
2. While still on the lawn, disengage the PTO switch, then
wait for aHmoving parts to stop.
3. Turn the ignition switch to the STOP position.
4. Remove the key and keep in a safe place out of the
reach of children.
5_
Engage the parking brake. Fully depress the brake
pedal, pull UP on the parking brake control, and release
the brake pedal
19

Snapper 2690980 Specifications

General

Brand	Snapper
Model	2690980
Category	Lawn Mower
Language	English