Adjusting the Mower Cutting Height
Use the mower cutting height adjustment lever to raise or
lower the cutting height (see Features and Controls).
The cutting height has seven positions between 1.5” and
4.0” (3,8 and 10,2 cm).
Cruise Control
TO ENGAGE:
1. Depress the forward ground speed pedal (see Features
and Controls).
2. Pull up the cruise control when the desired speed is
reached. The cruise will lock in one of its ve locking
positions.
TO DISENGAGE:
1. Depress the brake pedal.
OR
2. Depress the forward ground speed pedal.
Parking Brake
Use the parking brake control to engage or disengage the
parking brake when the tractor is stopped (Features and
Controls).
Engage the Parking Brake - To engage the parking brake,
fully depress the brake pedal, pull UP on the parking brake
control, and release the brake pedal.
Disengage the Parking Brake - To disengage the parking
brake, fully depress the brake pedal, press DOWN on the
parking brake control, and release the brake pedal.
6. Engage the parking brake. Fully depress the brake
pedal, pull UP on the parking brake control, and release
the brake pedal.
NOTE: In the event of an emergency, the tractor/engine
will stop immediately by pressing the on/o push button or
pulling out the starter insert.
Stopping the Tractor and Engine
WARNING
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
• Do not choke the carburetor to stop the engine.
1. Release the ground speed pedals to return to the
NEUTRAL position (see Features and Controls).
2. While still on the lawn, disengage the PTO switch, then
wait for all moving parts to stop.
3. Move the throttle/choke control to the SLOW position.
4. Press the start/stop push button to STOP the engine.
5. Remove the starter insert and keep out of the reach of
children.
18
To Next Page
Loading...
Need help?
General
