Control Group Upper
Footnotes:
TP 400-7380-IR-HZ-N
Manual No. 510153324 HP HYDRO DRIVE ZTR
375Z SERIES
19
Part No Descri
tionItem Qt
Note
1 5021098 2 BEARING, BRONZE FLANGE, 3/4
2 5021499 2 BEARING, FLANGE
3 5025013X14 4 BOLT, 3/8-16 X 1-3/4" GD5
4 5025394 8 NUT, 3/8-16 HEX NYLOCK FLANGE
5 5025179X4 4 SCREW, #10-24 X 1/2" ROUND PHILLIPS
6 5025029 4 NUT, #10-24 HEX
7 5025013X8 4 BOLT, 3/8-16 X 1" GD5 YZ
8 5022095 2 SWITCH, PLUNGER, N.O./N.C.
9 5025327 4 BOLT, 3/8-16 X 1-1/4 SHCS (SOCKET HEAD)
10 5025055X16 2 BOLT, 5/16-18 X 2" GD5 TFL
11 5025139 4 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
12 5025055X14 2 BOLT, 5/16-18 X 1-3/4" GD5 TFL
13 5025011X20 8 BOLT, 5/16-18 X 2-1/2" GD5 YZ
14 5025155 12 WASHER, 5/16" SAE
15 5025392 8 NUT, 5/16-18 HEX NYLOCK FLANGE
16 5025170 4 WASHER, 5/16" LOCK
17 5025011X8 4 BOLT, 5/16-18 X 1" GD5 YZ
18 5401020D 1 WELD, CONTROL SHAFT - RH
19 5401017D 1 WELD, CONTROL SHAFT - LH
20 5022068 2 GRIP, FOAM, 3/4" ID, 16" LONG
21 5047004 2 MOUNT, CONTROL ARM
22 5401096D 1 WELD, HANDLE MOTION CONTROL-LH
23 5401097D 1 WELD, HANDLE MOTION CONTROL-RH
24 5048264 8 SPACER, .39 X .63 X 1.50
25 5048169D 2 WELD, PLATE, NEUTRAL
26 5023157 2 BOLT, 5/16-18 X 1 1/2" FLANGE
27 5025139 4 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
28 5025096 4 NUT, 3/8-16 HEX NYLON LOCK
To Next Page
Loading...
