Snapper 381451HBVE

15
Section 3 – MAINTENANCE
3.2.9. Lubrication - Grease Fittings
(Continued from previous page)
FIGURE 3.8
2. Front axle kingpins, 2-3 shots. See Figure 3.9.
FIGURE 3.9
3. Front wheel bearings, 3-5 shots. See Figure
3.10.
FIGURE 3.10
4. Transmission belt idler arm pivot, 1-3 shots.
See Figure 3.11.
FIGURE 3.11
5. Deck spindle housings, 1-3 shots. See Figure
3.12.
FIGURE 3.12
AXLE PIVOT
KING PIN
BUSHING
WHEEL
BEARINGS
IDLER ARM
PIVOT
SPINDLE HOUSING
GREASE FITTING