EasyManua.ls Logo

Snapper 7800980-00

Snapper 7800980-00
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
80030025USCN
Revision: A
Not for
Reproduction
Question and Answer IconNeed help?

Do you have a question about the Snapper 7800980-00 and is the answer not in the manual?

Snapper 7800980-00 Specifications

General IconGeneral
Cutting Width21 inches
Cutting Height1.25 - 3.75 inches
Deck MaterialSteel
Wheel Size (Front)8 inches
Wheel Size (Rear)8 inches
Fuel TypeGasoline
Mulching CapabilityYes
Bagging CapabilityYes
Side Discharge CapabilityYes
Engine TypeBriggs & Stratton
Starter TypePull Start

Summary

Operator Safety

Safety Definitions

Explains hazard symbols like Danger, Warning, Caution, and Notice for operator awareness.

Safety Symbol Definitions

Lists and defines safety symbols found on the mower for proper identification.

California Proposition 65 & General Safety

Operating Safety

General advice on safe operation, emphasizing operator responsibility and common sense.

Slope Operation Safety

Guidelines for safe mowing on inclines, including maximum slope angles and caution.

Children Safety

Precautions to prevent children from entering the mowing area and ensuring their safety.

General Safety Messages

Poisonous Gas Hazard

Warning about carbon monoxide from engine exhaust and safety measures to avoid exposure.

Protection For Children

Emphasizes keeping children away from the mower during operation due to inherent risks.

Preparation and Safe Operation

Maintenance and Storage

Operation - Before Starting

Fuel and Oil Recommendations

Starting and Propelling the Mower

Starting the Mower

Step-by-step instructions for starting the engine using recoil or electric start methods.

Stopping the Mower

Procedures to safely stop the engine and blade during operation.

Handle and Cutting Height Adjustment

Cutting Height Adjustment

How to set the mower deck to the desired grass cutting height for optimal performance.

Maintenance Chart and Emissions Service

Maintenance Chart

Schedule for routine mower and engine maintenance tasks based on hours or time.

Engine Maintenance Procedures

Mower Blade and Belt Checks

Drive System Adjustments and Service

Drive Disc Maintenance

Driven Disc Replacement

Driven Disc Replacement

Steps for replacing the driven disc assembly in the mower's drive system.

Driven Disc Bearing Replacement

Driven Disc Bearing Replacement

Instructions for replacing the bearing in the driven disc assembly.

Pulley End Bearing Replacement

Pulley End Bearing Replacement

Procedures for replacing the bearing on the pulley end of the hex shaft.

Belt Service

Transmission Poly-V Belt Replacement

Troubleshooting

Engine Will Not Start (Recoil)

Common causes and solutions for recoil start failure.

Engine Will Not Start (Electric)

Common causes and solutions for electric start failure.

Engine Stalls or Stops After Running

Reasons why the engine stops during operation and how to fix them.

Warranties

Warranty Statement and Coverage

Overview of limited warranty, coverage terms, and conditions for the product.

Emissions Control Warranty

Emissions Control Warranty Provisions

Specifics on warranted emissions parts and their coverage terms.

Slope Guide

Slope Operation Safety

Crucial safety instructions for mowing on slopes, including angle limits and control.

Related product manuals