MAIN CASE/GEARS (Series 4&5)
Footnotes:
TP 400-5172-9-RT-N
Manual No. 7006047INTERMEDIATE
SERIES 3, 4 & 5
13
Part No Descri
tionItem Qt
Note
37 7018869 1 BEARING, Tine Shaft
38 7029890 1 SPACER, Tine Shaft Long
39 7041726 1 WELDMENT, Tine Shaft (#50/18T)
40 7028476 1 CHAIN, Tine (Endless Roller) #50
41 7091513 4 SCREW, 5/16-24 x 1-3/4” Hex Head Cap GR5 Was 91689
42 7011791 1 RETAINER, 5/16” Bolt (Black)
43 7091076 16 WASHER, 5/16” Flat
44 7091690 4 WASHER, 5/16” Split Lock
45 7091297 4 NUT, 5/16-24 Hex Was 91692
46 7090053 4 WASHER, 1/4” Internal Tooth Lock Was 91023
47 7090095 4 NUT, 1/4-20 Hex Was 91024
48 7091946 21 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
49 7011024 1 PLUG
50 7090873 3 WASHER, 7/16” Internal Tooth Lock
51 7090460 3 NUT, 7/16-20 Hex
52 7091601 8 NUT, 5/16-18 Hex Flange Lock Was 91070
53 7091584 6 NUT, 1/4-20 Hex Flange Lock Was 91065
54 7090953 3 SHIM-WASHER
55 7020938 1 SHIM WASHER, 5/8”
56 7090072 12 SCREW, 1/4-20 x 5/8” Hex Head Cap GR5 Was 79405
57 7091122 1 SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap Was 90539
58 7091819 3 SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap Was 90362
59 7023514 1 O-RING, #012
60 7038647 1 REINFORCEMENT, R.H. Frame
61 7038648 1 REINFORCEMENT, L.H. Frame
62 7034680 1 BRACE, Belt Cover
63 7061174 1 SIDE PLATE Was 33415
64 7033962 1 BRACKET, Belt Cover- IRT
65 7033531 3 WASHER, Shim
66 7058469 1 * ASSY, Gear 16T (Incl. two 15339 DX Bearings)
67 7090606 4 BOLT, 5/16-18 x 5/8” Hex Flange Lock Was 91510
68 7072801 1 WASHER, Shim .63 x 1.24 x .05
NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in.
To Next Page
Loading...
Need help?
General
