Snapper RT8S - User Manual

Safety Instructions & Operator's Manual
SNAPPER
MODEL RT8 & RT8S
REAR TINE TILLERS
Thank you for buying a SNAPPER product!
Your Tiller was designed and built to provide
long and satisfactory service. Study this manual
carefully BEFORE operating the Tiller and pay
particular attention to the Important Safety
Instructions below. Keep in mind that a Tiller,
like any other mechanical device, can be poten-
tially dangerous if used improperly. Following
the instructions in this and the engine manual
will help you continue to enjoy the trouble-free
operation expected of a SNAPPER.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
This
tilling
machine
is
capable
of
causing
personal
injury!
Failure
to
observe
the
following
instructions
could
result
in
serious
injury
to
the
operator
or
persons
in
the
operational
area.
CAREFULLY
READ
THESE
INSTRUCTIONS
and
be
sure
to
question
your
SNAPPER
Dealer
if
in
doubt
about
anything.
Should
the
Dealer
not
answer
to
your
satisfaction,
write
or
call
the
SNAPPER
Customer
Service
Department
at
McDonough,
Georgia,
30253
(Phone: (404)
954-2500).
1.
Become
thoroughly
familiar
with
all
controls
and
learn
how
to
STOP
tine
rotation
quickly
in
preparation
for
emergencies.
Never
allow
children
or
immature,
uncoordinated
or
inexperienced
persons
to
operate
your
Tiller.
Keep
everyone
safely
away
from
the
area
being
tilled.
Be
especially
watchful
for
children
and
pets
darting
into
the
area
while
operating.
Wear
protective
clothing
and appropriate
shoes
to
provide
best
footing
on
uneven
terrain.
Persons
under
the
influence
of
alcohol
or
drugs
MUST
NOT
be
allowed
to
operate
your
Tiller.
Stay
alert,
give
complete
and
undivided
attention
to
the
job
on
hand.
Fill
fuel
tank
ONLY
when
engine
is
STOPPED
and
NOT
HOT.
Fill
outside
where
fumes
can
be
safely
dissipated.
9. Make
sure
clutch is disengaged
BEFORE
attempting
to
start.
10.
Keep feet, hands
and
clothing
safely
away
from
tines
at
ALL
times.
11.
Disengage
the
tines
and
STOP
the
engine
BEFORE
making
any
adjustments,
attempting
to
clean
or
clear
the
tines,
or
leaving
the Operator's
position
even momentarily!
12.
Remember.
to
avoid
operating
the
engine
in
any
enclosed
area
where
deadly
exhaust
fumes
could
accumulate.
PNOARWON
SNAPPER...
ca.
20253
us..
MANUAL No. 1-4685 (Rev. 3, 8/93)

Snapper RT8S Specifications

General

Engine	Briggs & Stratton
Engine Displacement	208cc
Tine Rotation	Forward
Engine Type	4-Cycle
Engine Displacement (cc)	208
Forward Tines	Yes
Tilling Width (in)	18
Warranty	2 years
Tilling Width	18 inches

Summary

Important Safety Instructions

Operator Safety and Area Control

Ensure only experienced operators use the tiller and keep bystanders and children at a safe distance.

Personal Protection and Proximity Warnings

Wear appropriate clothing and footwear for safe operation and keep body parts away from moving tines.

Operational and Fueling Safety

Follow safe procedures for fueling, starting, adjustments, and operating in well-ventilated areas.

Operating Instructions

Pre-Start Check List

Essential checks before starting the tiller, including oil, air cleaner, surfaces, guards, and fuel.

Starting Procedure

Step-by-step guide for starting the engine, including choke, starter, and throttle control.

Stopping Procedure

Tilling Procedure

Tilling Setup and Sequence

Setting handle bar, skid arm, speeds, and initiating the tilling process.

Tine Rotation Selection

Changing Tine Rotation Direction

Tiller Tines

Tine Service and Replacement

Clutch Adjustment

Clutch Adjustment Procedure

Steps to adjust clutch springs for proper engagement and disengagement of tines and drive.

Clutch Test and Verification

Driven Disc Service

Drive Disc Traction Adjustment

Off-Season Storage

Storage Preparation Steps

Sealed Lead Acid Battery

Battery Safety Precautions

Important safety warnings regarding battery handling, acid contact, and charging precautions.

Warranty Information

Two Year Limited Warranty