Snapper CICFR5505HV - Page 33

HILLER - FURROWER KIT
Footnotes:
TP 400-5172-9-RT-N
Manual No. 7006047INTERMEDIATE
SERIES 3, 4 & 5
33
Part No Descri
p
tionItem Qt
y
Note
7060731 KIT, Hiller/Furrower (Incl. items 1 thru 26)
1 7047875 1 BRACKET, Clevis
2 7047858 1 DRAW-BAR
3 7047865 1 STANDARD
4 7032430 1 SKID-SHOE
5 7035072 1 HILLER-FURROWER
6 7036135 1 WING, Left Side Hiller
7 7036134 1 WING, Right Side Hiller
8 7090779 1 BOLT, 1/2-13 x 3-1/2” Sh. Neck. Carriage GR2
9 7090705 1 WASHER, 1/2” Flat
10 7091316 1 NUT, 1/2-13 Hex GR5 or B Was 90258
11 7090316 4 BOLT, 5/16-18 X 3/4” Square Neck Carriage GR5
12 7090188 8 WASHER, 5/16” Flat
13 7091537 4 WING-NUT, 5/16-18 Was 90492
14 7091596 3 PIN, 1/8” Hair Was 13844
15 7013111 3 PIN, 1/2 x 1” Clevis
16 7091540 2 BOLT, 5/16-18 x 1-1/2” Hex Head Cap GR5 Was 90211
17 7091511 2 NUT, 5/16-18 Hex GR5 or B Was 90196
18 7080187 2 WASHER, 5/16” Split Lock
19 7040527 1 BRACKET, Mounting (Front Tine Tiller only)
20 7013460 1 PIN, 3/8 x 1-1/2” Clevis (Front Tine Tiller only)
21 7038217 1 SUPPORT, Clevis
22 7090134 2 SCREW, 3/8-16 x 3/4” Hex Head Cap GR5
23 7090122 1 WASHER, 3/8” Flat
24 7090118 2 WASHER, 3/8” Split Lock
25 7091302 6 NUT, 3/8-16 Hex GR5 or B Was 90130
26 7014206 1 SPACER (not shown)