EasyManua.ls Logo

Snapper CZT19480KWV User Manual

Snapper CZT19480KWV
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Safety Instructions & Operator's Manual for
MID-MOUNT
ZERO TURNING
HYDRO DRIVE
SERIES 0
MODELS
CZT19480KWV
HZT21480BV
MODEL NUMBER EXPLANATION
I c IZTI1
MODEL DESIGNATION _
DRIVE SYSTEM TYPE
ENGINE HP *
C - Commercial Mid Mount
H - Homeowner Mid Mount
ZT - Zero Turning - Hydro Drive
POWER UNIT
19 - Engine Horse Power
21 - Engine Horsepower
81( , IKWVl
I
48 - 48" Mower Width
0 - Series Designation
ENGINE TYPE
SERIES DESIGNATION
MOWER DECK SIZE
KW - Kawasaki Engine
B - Briggs Engine
V - Over Head Valve
Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
SNAPPER McDonough,
GA., 30253 U.S.A.
COPYRIGHT © 2004
SNAPPER A DIVISION OF SIMPLICITY MFG INC
ALL RIGHTS RESERVED
MANUAL No. 7-4365 (I.R. 11/3/04)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Snapper CZT19480KWV and is the answer not in the manual?

Snapper CZT19480KWV Specifications

General IconGeneral
Cutting Width48 inches
TransmissionHydrostatic
Deck MaterialSteel
Mulching CapabilityYes
Bagging CapabilityOptional
Side DischargeYes
Drive SystemRear-Wheel Drive
Warranty3-year limited residential

Related product manuals