Section 1 - FAMILIARIZATION
BLADE
SWITCH
KEY
SWITCH
MOTION CONTROL
LEVER
CHOKE
CONTROL
L HOUR
METER
OPERATOR'S
SEAT
ENGINESPEED
CONTROL
MOTION CONTROL
LEVER
RIGHT HAND
FUELTANK
LEFTHAND
FUELTANK
DECK LIFT
LEVER
PARKING
BRAKE LEVER
CONTROLPANEL
(SEEINSET)
DISCHARGE
DEFLECTOR
DECK LIFT PEDAL
FIGURE
1.1 INTRODUCTION
This manual has been prepared for the operators of the
SNAPPER MID MOUNT ZERO TURNING HYDRO
DRIVE. Its purpose, aside from recommending
standard operating procedures and routine service
requirements, is to promote SAFETY through the use of
accepted operating practices. Read, Understand and
Follow the IMPORTANT SAFETY INSTRUCTIONS on
Pages 2 thru 4 of this manual and All SAFETY
messages on the unit and its attachments before
operating. SNAPPER recommends returning the unit to
an authorized SNAPPER dealer annually for inspection
and addition of any new devices which might upgrade
the safety of the mower.
1.1
IMPORTANT
The figures and illustrations in this manual
are provided for reference only and may
differ from your specific model. Contact
your Snapper dea er fyou have quest ons
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1,
shows the essential parts of the unit. It is
recommended that all operators of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner's manual. Study
these manuals before operating and keep both handy
for future reference. For the nearest SNAPPER dealer
in your area, check the yellow pages under the heading
LAWN MOWERS. For engine parts and service, look
for the engine manufacturer's dealers under the
heading, ENGINES - gasoline.
6
To Next Page
Loading...
Need help?
General
