Snapper LT-100 Series

50" Deck Blade Drive Assembly
Footnotes:
TP 400-5330-C-TC-N
Manual No. 7006261HYDRO DRIVE ELECTRIC CLUTCH
LT-100 SERIES
33
Part No Descri
p
tionItem Qt
y
Note
1 7500607 1 ASSY, MOWER HOUSING 48/50/52”
2 721447 3 JACKSHAFT HOUSING ASSY
3 721446 1 SPACER, PULLEY (per Jackshaft Housing
Assembly)
4 726957 2 BALL BEARING, JACKSHAFT (per Jackshaft Housing
Assembly)
5 726958 1 SHAFT, SPLINED (per Jackshaft Housing
Assembly)
6 726959 1 JACKSHAFT HOUSING (per Jackshaft Housing
Assembly)
7 721095 1 FITTING - LUBRICATION (1/4-28 self-Tap) (per Jackshaft Housing
Assembly)
8 720142 1 NUT, HEX FLANGE, 3/8-16 NC
9 725179 3 BLADE ADAPTER
10 721334 3 BLADE 50/52 (17.66")
11 722600 6 WASHER - HARDENED 1.0OD X .625ID X .188
12 722382 3 NUT, BLADE, 9/16-18 ZINC PLATE YELLOW CHROMATE
13 720192 1 BOLT, HEX, 3/8-16 UNC X 1.50 BRIGHT ZINC
14 7090122 1 WASHER, 3/8” Flat SAE
15 721385 1 PULLEY BACKSIDE IDLER
16 7300924 1 ARM - IDLER ref. 725117 & 7300922)
17 720148 1 NUT FLANGE, 3/8-16 ZINC PLATED
18 720139 2 HEX NUT, 5/16-18 FLANGE SER YZ
19 720049 2 BOLT CARRIAGE, 5/16-18 X .62
20 7300923 1 BRACKET - BRAKE MOUNTING ref. 726514
21 720091 1 SHOULDER BOLT, 0.75 X 0.60 X 3/8-16
22 726842 1 BELT SECONDARY 52.75" HA
23 726855 1 V-BELT A WEDGE 103.10 HA ref. 1734048
24 726069 4 S.S. PULLEY 46”
25 726507 3 NUT PULLEY
26 721313 1 COVER, LEFT PULLEY
27 722871 3 SCREW
28 722859 2 SCREW THREAD FORMING
29 721315 1 COVER, RIGHT PULLEY
30 720045 15 HHST, 3/8-16X1.25
31 728320 1 BRACKET, COVER
32 722438 1 SPRING, EXTENSION
33 7400265 1 ASSEMB-IDLER ARM 50” (was 721338)
34 725167 1 SPACER 1/2” TO 17MM
35 725225 1 PULLEY IDLER
36 721081 1 ROD BELT GUIDE
37 725149 1 BRACKET, PULLEY COVER