Snapper LT-200 Series User Manual

RegularMaintenance
Check & Fill Engine Oil
Service Interval: Before each use, and every 8 hours.
1. Turn the engine off, and set the parking brake to
PARK.
2. Clean the area around the dip stick (C, Figure 22 or
23).
3. Remove the dip stick (C) and clean it with a paper
towel.
4. insert the dip stick (C) back into the engine. Briggs &
Stratton Models, thread the cap back onto the tube.
Kohler Models, push cap (C) firmly into place.
5. Remove the dip stick and read the oil level. The oil
level should be between the "FULL" and "ADD" marks
(D). If not, add oil according to the oil
recommendations chart (Figure 25).
Figure 22. Briggs & Stratton single cylinder Models
A. Oi! Drain Valve
B. Oil Filter
C. Dip Stick
D. Checking Oil LeveJ
Figure 23. Briggs & Stratton two cylinder ModeJs
A. Oil Drain Valve
B. Oi! Filter
C. Dip Stick
D. Checking OiJ Level
23

Snapper LT-200 Series Specifications

General

Brand	Snapper
Model	LT-200 Series
Category	Lawn Mower
Language	English