Snapper NZM19480KWV - Page 63

52" CUTTING DECK ASSEMBLY PT.1
Footnotes:
TP 400-5017-4-NZ-N
Manual No. 7006930MID MOUNT Z-RIDER
NZM SERIES 0 & 1
63
Part No Descri
p
tionItem Qt
y
Note
1 7059374 1 WELDMENT, 52” Deck Deck Group 58327
2 7091305 2 SCREW, 3/8-16 x 2” Hex Head Cap, GR5
3 7027327 1 WELDMENT Pivot Pin
4 7091304 2 SCREW, 3/8-16 x 1” Hex Head Cap, GR5
5 7091299 12 NUT, 3/8-16 Hex Nyloc
6 7073142 6 ROLLER Low Density Polyethylene
7 7027344 4 WASHER, 5/8” Flat SAE
8 7029264 4 GAUGE WHEEL, Polyethylene
9 7091640 12 BOLT, 3/8-16 x 1” Square Neck Carriage GR 5
10 7091316 8 NUT, 1/2-13 Hex, GR B
11 7090543 2 SCREW, 1/2-13 x 2” Hex Head Cap, GR5
12 7029355 2 BOLT, 1/2-13 x 3-3/4” Hex Head Cap, GR5
13 7091922 2 NUT, 1/2-13 Hex Light Nyloc
14 -- 2 ASSEMBLY, Pusher Bar (Includes items 15-17)
15 7059108 1 WELDMENT, Pusher Bar
16 7029263 2 SLEEVE - Suspension
17 7029258 4 BUSHING - Suspension
18 7053562 2 ASSEMBLY, Chain & Eyebolt (see Front Frame Assy page, item
63)
19 7074569 2 BRACKET, Front Deck Lift used on Series 0
19A 7075582 1 BRACKET, Front Deck Hanger R. H. used on Series 1
19B 7075583 1 BRACKET, Front Deck Hanger L. H. used on Series 1
20 7036456 4 SPACER, Gauge Wheel
21 7091822 4 BOLT, 1/2-13 x 5” Hex Head
22 7091922 4 NUT, 1/2-13 Hex Light Nyloc
23 7091331 2 WASHER, .406 x 1.50 x .120 Flat
24 7091619 2 NUT, 3/8-16 Hex Flange Lock
25 7074789 1 WHEEL BRACKET Front Right
26 7074790 1 WHEEL BRACKET Front Left