Snapper NZM19480KWV

DECK SPINDLE ASSEMBLIES
Footnotes:
TP 400-5017-4-NZ-N
Manual No. 7006930MID MOUNT Z-RIDER
NZM SERIES 0 & 1
73
Part No Descri
p
tionItem Qt
y
Note
1 7054011 1 SUB-ASSEMBLY, Spindle (Includes indented items below)
2 7029254 1 SPACER, Bearing
3 7029274 1 RING, Spindle Retaining
4 7029384 1 VENT, Spindle (Alemite # 321839)
5 7029422 2 BALL BEARING (2 per item 1, sub-assembly)
6 7058237 1 HOUSING, Spindle
7 7029302 6 BOLT, Ribbed (3/8-16 x 1-1/4” Thread) (6 per item 1, sub-
assembly)
8 7076998 1 FITTING, Lube (1/4-28 Thread; Alemite # 3038-B)
9 7059311 1 SHAFT, Spindle
10 7029271 4 SPACER, Blade
11 7029245 1 PULLEY, 5.75” Diameter
12 7091299 6 NUT, 3/8-16 Hex Nyloc (6 per spindle assembly)
13 7016440 1 WASHER, Beveled
14 7075075 1 PULLEY, Driven (48” Deck only)
-- 7075076 1 PULLEY, Driven (52” Deck only)
-- 7029250 1 PULLEY, Driven (61” Deck only)
15 7075771 3 BLADE, 16-1/2” (48” Deck only) Was 29247
-- 7075751 3 BLADE, 18” (52” Deck only) Was 29246
-- 7075770 3 BLADE, 18” (61” Deck only) Was 17081
16 7063234 1 BOLT, 5/8-11 x 7-1/2” Hex, Grade 5
17 7063237 1 NUT, 5/8-11 Hex Flange Lock, GR5
18 7029270 1 WASHER, Spindle
19 7063238 1 SEAL, Nylos For Brg., Pre-Seal Kit (63240)
installation, discard 3 & replace
with 19 & 20.
20 7013370 1 WASHER For Brg., Pre-Seal Kit (63240)
installation, discard 3 & replace
with 19 & 20.