Snapper NZM19480KWV - Page 65

52" CUTTING DECK ASSEMBLY PT.2
Footnotes:
TP 400-5017-4-NZ-N
Manual No. 7006930MID MOUNT Z-RIDER
NZM SERIES 0 & 1
65
Part No Descri
p
tionItem Qt
y
Note
4 7091304 3 SCREW, 3/8-16 x 1” Hex Head Cap, GR5
5 7091299 3 NUT, 3/8-16 Hex Nyloc
27 -- 1 ASSEMBLY, Idler (see breakdown on Idler Assy page) Deck Group 58327
28 -- 1 ASSEMBLY, Center Spindle (see breakdown on Deck Spindle
Assy page)
29 -- 2 ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy
page)
30 7075083 1 BELT, Primary (HB Section, 91.30” effective length)
31 7027950 1 SPRING, Chute
32 7029277 1 PIN, Chute Hinge
33 7044806 1 WELDMENT, Chute Deflector (52” Euro)
34 7091313 1 PIN, 3/32 x 1” Cotter
35 7072915 1 SPRING, Idler Primary (1.25” O.D. x 10” long)
36 7029278 1 SPRING, Idler (1.17” O.D. x 7.5” long)
37 7029266 1 V-BELT, Secondary- 52” (HB Section, 116.30” effective length)
38 7090361 4 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
39 7074571 1 BELT COVER, Left Hand
40 7074552 1 BELT COVER, Right Hand