Snapper P217019BV - User Manual

Safety Instructions & Operator’s Manual for
21” STEEL DECK
WALK MOWERS
SERIES 19
MODEL NUMBER EXPLANATION
P 21 70 19 B V E
SELF-PROPELLED ENGINE OPTION
CUTTING WIDTH ENGINE DESIGNATION
ENGINE HORSE POWER * SERIES DESIGNATION
P – Self Propelled Model 60 – 6.0 HP (Engine Horse Power) 19 - Series Designation
21 – 21” Cutting Width 675 – 6.75 HP (Engine Horse Power) B – Briggs & Stratton V – Overhead Valve
70 – 7.0 HP (Engine Horse Power) KW – Kawasaki Engine E – Electric Start
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2005
SNAPPER – A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
MANUAL No. 7100366 (I.R. 9/13/2005)
TP 100-5084-IR-WB-N
MODELS
2167519B
P2167519B
P217019BV
P217019BVE
P216019KWV

Summary

Model Number Explanation

Important Safety Instructions

Protection for Children

Ensures child safety during operation.

Slope Operation

Guidelines for safe mowing on inclines.

Preparation

Steps before operating the mower.

Safe Handling of Gasoline

Precautions for safe refueling and storage.

Operation

General guidelines for operating the mower.

Maintenance and Storage

Procedures for upkeep and storing the mower.

Section 1: Familiarization

1.1 Introduction

Overview of the operator's manual's purpose.

1.2 Nomenclature

Identifies key parts and controls of the mower.

Section 2: Operating Instructions

2.1 Pre-Start Check List

Ensures mower readiness before starting.

2.2 Starting & Operation

Steps for starting engine and blade, and basic operation.

2.3 Stopping

Procedures for stopping the mower.

2.4 Handle Height Adjustment

Adjusting the handle for operator comfort.

2.5 Cutting Height Adjustment

Setting the desired cutting height.

2.6 Installation of Grass Bag Adapter

Guides for attaching the grass bag adapter.

2.7 Installation of Recycling Plug

Instructions for installing the optional recycling plug.

2.8 Installation of Grass Bag

How to install the grass bag.

2.9 Installation of Grass Catcher

Steps for attaching the grass catcher.

2.10 Removing and Dumping Grass Catcher

Procedure for emptying the grass catcher.

2.11 Installation of Discharge Deflector

Instructions for fitting the discharge deflector.

2.12 Installation of Recycling Cover

Steps for installing the recycling cover.

2.13 Recycling Operation

Guidance on how to use the recycling feature.

Section 3: Maintenance Instructions

3.1 Introduction

Introduction to maintenance requirements.

3.2 Service - After First 5 Hours

Maintenance tasks after the initial 5 hours of use.

3.2.1. Change Engine Oil

Procedure for changing the engine oil.

3.2.2. Check Grease Level in Transmission

Checking and adding transmission grease.

3.2.3. Check Mower Blade

Inspection of the mower blade for wear and damage.

3.2.4. Check Engine Drive Belt

Visual inspection of the engine drive belt.

3.2.5. Check Transmission Poly-V Belt

Visual inspection of the transmission belt.

3.3 Service - Annually

Annual maintenance tasks.

3.4 Storage Procedure

Steps for preparing the mower for storage.

Section 4: Adjustments and Repair

4.1 Mower Blade Replacement

Procedures for replacing the mower blade.

4.1.1. Standard Blade Wear Limit

Identifying wear limits for standard blades.

4.1.1.A. Ninja Blade Wear Limit

Identifying wear limits for Ninja blades.

4.1.2. Blade Sharpening

Instructions for sharpening the mower blade.

4.2 Wheel Drive Control Adjustment

Adjusting the wheel drive control mechanism.

4.3 Driven and Drive Disc Service

Troubleshooting and servicing the drive disc system.

4.3.1. Cleaning Drive Disc & Driven Disc

Cleaning procedures for drive and driven discs.

4.3.2. Drive Spring Repair;Replacement

Repair or replacement of the drive spring.

4.3.3. Driven Disc Adjustment

Adjusting the driven disc for proper operation.

4.3.4. Replacing Rubber Driven Disc

Instructions for replacing the rubber driven disc.

4.3.5. Replacing Bearing In Driven Disc Assembly

Procedure for replacing the bearing in the driven disc assembly.

4.3.6. Replacement Of Bearing On Pulley End Of Hex Shaft

Replacing the bearing on the pulley end of the hex shaft.

4.4 Belt Service

Information on servicing engine and transmission belts.

4.4.1. Engine Drive Belt Replacement

Procedure for replacing the engine drive belt.

4.4.2. Transmission Poly-V Belt Replacement

Procedure for replacing the transmission Poly-V belt.

4.5. Battery Service

Procedures for battery maintenance and testing.

4.5.1. New Battery Preparation

Steps for preparing a new battery.

4.5.2. Battery Service

General battery service procedures.

4.5.3. Battery Storage

Guidelines for storing the battery.

4.5.4. Battery Testing

Methods for testing battery condition.

Troubleshooting

Engine Will Not Start Using Recoil Starter

Troubleshooting starting issues with recoil starter.

Engine Stalls or Stops After Running

Diagnosing engine stalling or stopping problems.

Engine Loses Power

Identifying causes for engine power loss.

Excessive Vibration

Troubleshooting excessive mower vibration.

Mower Will Not Move Loss Of Traction (Self-Propelled Models)

Resolving issues with self-propelled traction.

Cutting Grass Improperly

Diagnosing and fixing improper grass cutting.

Poor Grass Discharge

Troubleshooting grass discharge problems.

Oil Leaking

Identifying and fixing oil leaks.

Service Schedule

Maintenance;Replacement Parts

List of parts for maintenance and replacement.

2 Year Limited Warranty

Disclaimer of Warranty

Exclusions and limitations of warranty coverage.

Primary Maintenance

Starting Check List

Pre-start checklist for ensuring proper operation.

Snapper P217019BV Specifications

General

Brand	Snapper
Model	P217019BV
Category	Lawn Mower
Language	English