Snapper PRO SW20KAV1748 - Page 19

PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - Lower
Footnotes
1 5025125 2 NUT, 7/16-14 HEX NYLON LOCK
2 5025139 2 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE)
3 5025055X14 1 BOLT, 5/16-18 X 1-3/4 GD5 TFL
4 5101281 1 SPACER, .26 X .50 X .50 YZ
5 5101339 2 SPRING, EXTENSION, 3.281 X .751 X .075 WIRE
6 5010580 2 COLLAR, 1/2" SET
7 5101352 2 SPACER, .33 X .50 X .75, YZ
8 5403330D 1 WELD, PEDAL, NEUTRAL RETURN - RED
9 5025015X6 2 BOLT, 7/16-14 X 3/4, GD 5 YZ
10 5025391 4 NUT, 1/4-20 HEX NYLOCK FLANGE
11 5025189X24 2 EYE BOLT, 1/4-20 X 3, ZC
12 5101414 1 WASHER, .390 X 1.25 X 1.00, YZ
13 5025013X16 1 BOLT, 3/8-16 X 2 GD5 YZ
14 5025394 5 NUT, 3/8-16 HEX NYLOCK FLANGE
15 5023212 2 NUT, 5/16-24 HEX, LH
16 5025011X16 2 BOLT, 5/16-18 X 2", GD5
17 5025288 2 WASHER, 1/4" FENDER
18 5025010X18 1 BOLT, 1/4-20 X 2-1/4", GD5
19 5025010X14 1 BOLT, 1/4-20 X 1-3/4" GD5 YZ
20 5100832 2 SLEEVE, CRUISE CONTROL ROLLER
21 5021098 2 BEARING, BRONZE FLANGE, 3/4
22 5101243 2 ADJUSTER, ROD LINKAGE 5/16-24
23 5100766 2 ROLLER, SPEED CONTROL
24 5101240 2 ROD, CONTROL RAMP
25 5021146 2 BALL JOINT, 5/16-24, FEMALE
26 5025013X8 4 BOLT, 3/8-16 X 1 GD5 YZ
27 5025156 4 WASHER, 3/8 SAE
28 5101262 1 SPACER, .38 X 1.13 X 1.00 STEP, YZ
29 5403406D 1 WELD, CONTROL ARM - RH - RED
30 5403405D 1 WELD, CONTROL ARM - LH - RED
31 5403353D 1 WELD, CONTROL SHAFT - RED
32 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE
The above parts group applies to the following Mfg. Nos.:
2008
19
© Copyright Briggs and Stratton. All Rights Reserved.
5900702
5900700
TP 400-7338-IR-WD-SP