Snapper RZT26520 - Safety Interlock System Tests; System Testing Procedures

Decal, Control Panel,
L.H.
Part No. 7104232
7104232
Decal, Control Panel,
R.H.
Part No. 7104233
7104233
Decal, Ground
Speed Lever, L.H.
Part No. 7104226
7104226
Decal, Ground
Speed Lever, R.H.
Part No. 7104227
7104227
Decal, Transmission
Release
Part No. 7104231
7104231
Decal, Weight Limit
Part No. 7101940
Safety Interlock System Tests
This unit is equipped with a Safety Interlock System.
Do not attempt to bypass or tamper with the switches/
devices.

 • PTOswitchisengaged,OR
 • Parkingbrakeisdisengaged,OR
 • GroundspeedleversarenotlockedintheirSTART/
PARK positions.

 • PTOswitchisNOTengaged,AND
 • Parkingbrakeisengaged,AND
 • Groundspeedleversarelockedintotheir
START/PARK positions.

 • OperatorrisesoffseatwithPTOengaged,OR
 • Operatorrisesoffseatwithparkingbrakedis-
enaged, OR
 • Operatorrisesoffseatwithgroundspeedleversnot
locked in their START/PARK positions.

The mower blades and mower drive belt should come
to a complete stop within five seconds after the electric
PTO switch is turned off. If mower drive belt does not
stop within five seconds, see your dealer.
NOTE: Once the engine has stopped, the PTO switch
must be turned off, the parking brake must be engaged,
and the ground speed levers must be locked in their
START/PARK positions in order to start the engine.
WARNING
If the unit does not pass a safety test, do not
operate it. See an authorized dealer.
www.snapper.com
12
Not for
Reproduction
Not for
Reproduction