Snapper S50X Series - Page 9

PART NO. DESCRIPTIONREF NO. QTY.
Seat Mount & Floor Group
Footnotes
1 5025155 3 WASHER, 5/16 SAE
2 5025011X8 4 BOLT, 5/16-18 X 1 GD5 YZ
3 5025392 10 NUT, 5/16-18 HEX NYLOCK FLANGE
4 5025127 1 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
5 5025011X10 1 BOLT, 5/16-18 X 1-1/4 GD5 YZ
6 5021878 1 SPACER, .25 X .37 X .25
7 5025144X6 1 BOLT, 1/4-20 X 3/4", CARRIAGE
8 5025391 1 NUT, 1/4-20 HEX NYLOCK FLANGE
9 5044617 2 WASHER, .34 X 1.25 X 10 GA
10 5025394 10 NUT, 3/8-16 HEX NYLOCK FLANGE
11 5403706D 1 PLATE, SIO FLOOR MOUNT - RED
12 5100909 1 SEAT, NO ARM REST
13 5403015D 1 SEAT PLATE, STOP - RED
14 7078299 2 SPRING, SEAT SUPPORT
15 5402859D 1 MOUNT, SEAT STOP - RED
16 5403555D 1 PLATE, FOOT REST - RED
17 5403574D 1 WELD, PLATE, SEAT MOUNT - RED
18 5023263 1 VINYL CLAMP
19 5101374 1 SAFETY WALK, FLOOR REST, 16.00 X 6.00
20 5101333 1 SAFETY WALK, FLOOR PLATE, S50X, 10X17.13
21 5101004 1 SAFETY WALK, 4.00 X 7.50
22 5025013X8 6 BOLT, 3/8-16 X 1 GD5 YZ
23 5025156 6 WASHER, 3/8 SAE
24 1686907 1 ARM REST (SET OF TWO) (SV)
25 5100636 1 SPRING, SEAT ADJUSTMENT (SV)
26 5061599X1 1 KIT, SEAT RAILS (COMPLETE)(SV)
27 197546 4 MOUNT, VIBRATION, RUBBER
28 5100383 2 BUMPER, ROPS
29 5025481 4 BOLT, 3/8-16 X 5/8, SERRATED UNDER HEAD
30 5025480 4 WASHER, 3/8" ID, INTERNAL TOOTH
31 5025011X6 1 BOLT, 5/16-18 X 3/4 GD5
32 5041930 2 SPACER, .38 X .50 X .27
The above parts group applies to the following Mfg. Nos.:
2007
9
© Copyright Briggs and Stratton. All Rights Reserved.
5900683
5900709
5900734
TP 400-7345-IR-M5-SP