Need help?Do you have a question about the Snapper Series 6 and is the answer not in the manual?
General| Cutting Width | 21 inches |
|---|---|
| Engine | Briggs & Stratton |
| Drive System | Self-Propelled |
| Engine Type | 4-Cycle OHV |
| Engine Displacement | 163 cc |
| Cutting Height | 1.25 - 3.75 inches |
| Deck Material | Steel |
Detailed breakdown of steering components and their assembly, including king pins and tie-rods.
Explains parts and assembly of the main chassis, shift linkage, and related components.
Details components and assembly for the smooth clutch mechanism, including discs and springs.
Explains parts and assembly for the differential, drive hex tube, and right fender.
Details components for the chain case, sprocket, and left fender assembly.
Lists parts for cutting decks, deflectors, blades, and lift arm components.
Details components for drive belts, brake drum, and deck interlock switch.
Explains parts for lift arms, rails, and cam lift mechanisms, including pivot pins.
Details components and wiring for the ignition, battery, and interlock systems.
Lists parts for the standard grass catcher accessory, including frame and bag components.
Details parts for the twin-bag catcher accessory, including frame and bag components.
Details parts for the Bag-N-Wagon accessory, including hitch and wagon body.
Details the frame and canopy parts for the Bag-N-Wagon assembly.
To Next Page
