Snapper SXD21SPWM82 - Cutting Height and Slope Operation

CUTTING HEIGHT ADJUSTMENT (See Figure 9)
When shipped, the wheels on the mower are set to a low-cutting position. Before using the mower for the rst time, raise
the cutting position to the height best suited for your lawn. The average lawn should be between 1 1/2" to 2" (3.8 to 5 cm)
during cool months and between 2" and 3 1/2" (5 cm to 8.3 cm) during hot months
.
To adjust the blade height:
• To raise the blade height, grasp the height adjustment lever (1) and move it toward the back of the mower.
• To lower the blade height, grasp the height adjustment lever (1) and move it toward the front of the mower.
OPERATION
16
7
6
5
4
3
2
1
Fig. 9
Height Adjustments 1 3/8 - 3 3/4"
1st setting 1 3/8"
2nd setting 1 7/8"
3th setting 2 1/8"
4th setting 2 5/8"
5th setting 3"
6th setting 3 3/8"
7th setting 3 3/4"
(1)
Not for Reproduction