Steering Group - Manual Steering
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
Torque to
36-44 ft. lbs.
or 48-60 Nm
Steering cap snaps
over steering wheel.
Use washers
as required.
Torque to
36-44 ft. lbs.
or 48-60 Nm
Bearing mounts below
frame. Slide pinion on
steering shaft into gear
before tightening nuts.
18
21
14
7
11
10
13
15
12
1
6
19
2
20
4
8
3
17
5
6
5
9
16
5
15
986283
The above parts group applies to the following Mfg. Nos.:
2003
6
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694368 - YT1644
1694369 - YT1850
TP 400-3821-00-CQ-N
To Next Page
Loading...
