EasyManua.ls Logo

Snapper Z-Mow / 150Z

Snapper Z-Mow / 150Z
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
MAINTENANCE
MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
These services should be performed by a qualified service dealer.
RIDER MAINTENANCE, All Models
Before
Each Use
Spring
& Fall
8
Hours
25
Hours
100
Hours
200
Hours
Yearly
Clean Debris from Rider and Engine Compartment *
Clean Debris from Engine Cooling Areas & Air Filter *
Check Tire Pressure
Lubricate Rider & Mower *
Clean Deck & Check/Replace Mower Blades
Clean Battery & Cables
Check Rider Safety System **
Check / Adjust PTO Clutch
ENGINE MAINTENANCE,
18.5HP Briggs & Stratton
8 Hours
or Daily
25 Hours
or Every
Season
50 Hours
or Every
Season
100 Hours
or Every
Season
200 Hours or
Every Season
Yearly
Check Engine Oil Level *
Service Air Pre-Cleaner *
Change Oil *
Service Air Filter *
Change Oil & Filter *
Clean Cooling Fins *
Replace Air Filter *
Replace Spark Plugs
Replace Fuel Filter †
Check Valve Clearance †

Related product manuals