Safety Instructions & Operator's Manual for
MID MOUNT Z-RIDER
ZERO TURNING
HYDRO DRIVE
SERIES 0
I POWER UNIT MODELS
ZMT2500KH
I MOWER UNIT MODELS
ZM5201M I ZM6101M
MODEL NUMBER EXPLANATION
DRIVE DESIGNATION
MOWER OPERATION
CONTROL DESIGNATION
Z - Zero Turnina -Hvdro Drive
M - Mid Mount Mower
T- Twin Control Levers
I ZIMIT 1__ 1 O0IKHI
I I
POWER UNIT
26 - Enaine Horse Power 00 - Series Desianation
ENGINE TYPE
SERIES DESIGNATION
ENGINE HP
KH - Kohler Enaine
Z - Zero Turnina -Hvdro Drive
M - Mid Mount Mower
MOWER UNIT
52 - Mower Cuttina Width 01 - Series Desianation
61 - Mower Cutting Width
M - Mower Deck
Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
COPYRIGHT © 2000
SNAPPER INC.
ALL RIGHTS RESERVED
SNAPPER, McDonough,GA.. 30253 U.S.A.
MANUAL No. 7-3704 (I.R. 5/16/00)
To Next Page
Need help?
General
