Sno-Tek 920402 - PRODUCT SPECIFICATIONS; MODEL AND ENGINE SPECIFICATIONS; CHUTE, AUGER, AND IMPELLER SPECIFICATIONS; DRIVE, TIRES, AND WEIGHT SPECIFICATIONS

EN - 23
SPECIFICATIONS
Model Number 920402
Description Sno-Tek 24E
Engine LCT Storm Force
Gross Torque* – N•m (lbf-ft) 12.8 (9.5)
Displacement – cm
3
(in
3
)
208 (12.7)
High Idle – RPM (min) 3600 ± 100
Electric Start 120V
Fuel Tank Capacity – liter (qt) 2.7 (2.9)
Chute
Chute Rotation Angle 205°
Rotation Control 2.5X Quick Turn
Deflector Control In-dash Lever
Auger
Snow Clearing Width – cm (in) 61.0 (24.0)
Gearcase Aluminum
Auger Diameter – cm (in) 27.9 (11.0)
Impeller
Impeller Diameter – cm (in) 30.5 (12.0)
Impeller Speed (RPM) 1190
Impeller Tip Speed – m/sec (ft/sec) 19.0 (62.3)
Drive
Auger HA Belt
Traction
Disc-O-Matic
®
Speeds 6 Forward and 2 Reverse
Axle Control Pin-Lock
Tires
Size – cm (in) 13 x 4.10-6 Polar Trac
Pressure See tire sidewall.
Size and Weight
Length – cm (in) 131.8 (51.9)
Height – cm (in) 110.0 (43.3)
Width – cm (in) 67.1 (26.4)
Weight – kg (lb) 81.6 (180.0)
*Engine output stated in gross torque per SAE J1940 as rated by engine manufacturer.