3.1. Initial set-up
When accessing the voicemail system for the first time, you should also set up your personal
voicemail
1. Press the “Retrieve” key on the snom telephone itself or by dialing the extension
assigned on the service site to access the voice menu of the voicemail system.
2. Then select “0 Mailbox Options” to set up your voice mailbox.
3. Now press “1” to record a message in the event you are unavailable.
4. Now record your message and press “#” to end the recording.
5. Press “1” to accept the recording, “2” to replay the recording, and “3” to rerecord.
For more detailed information please refer to the voicemail leaflet.
3.2. Accessing voicemail
1.) By selecting the Message Key on the device.
2.) By dialing the extension you assigned on the service site for accessing voicemail.
4. IP adress
4.1. How can I find the telephone’s IP address?
The process for viewing a telephone’s IP address is identical on the snom D710/D712, D725 and
D765.
- Press down on the directional toggle key 4 times until “Maintenance” is displayed.
- Using the Confirm key, select “System Info” and the telephone’s IP address and MAC address is
shown.
The telephone’s IP address is required to configure the CTI client for example.
E. Where can you find help with your telephone system?
You can use various sources for help concerning your issues. Please use them in the order
suggested here:
To Next Page
Loading...
