The standard setting is “Line”. I.e., if the first four freely programmable function keys are not
programmed, the function keys with LEDs can be used as line keys.
Rapidly flashing green when the respective line has an incoming call.
Continuous green when the line is in use.
Slowly flashing green when the line has a call on hold
Voicemail LED
A continuous red light indicates a new message has been saved in voicemail.
*The LED indicator of snom 710 flashes solely in green color.
1.2. Outgoing call
Note:
When dialling an internal telephone number, only the extension needs to be entered.
When dialling external telephone numbers, you must first dial ‘0’, then enter the external
number.
Selecting the audio component
1.) Receiver
- Pick up receiver, enter number and press .
- Enter number and pick up receiver.
2.) Headset
- Enter number and press .
3.) Speaker / microphone
- Press the speaker key to activate the speaker or the microphone respectively.Enter the
number and press .
Dialling a number from the call lists
- Go to “Lists” and select the respective list. Press to open the desired list.
To Next Page
Loading...
