Snom D785 How To Configure

2/28/2019 Auto Provision YOUR snom 7/D7 IP Phones for 3CX v15
https://www.3cx.com/sip-phones/snom-710-720-760/ 1/5
How to configure snom 700/ D7XX Series for 3CX
This guide applies to v15.5 only.
On this topic
Supported Models: snom 700/D7XX series
snom 700 series
snom D7XX series
End of Life
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the IP Phone
Step 3: Provision the phone
Local LAN or SBC: Provision via Plug’n’Play
Remote phones: Provision via RPS server
Step 4: Extended Phone Configuration
Known Limitations
Supported Models: snom 700/D7XX series
snom 700 series
● snom 715
snom D7XX series
● snom D712
● snom D715
● snom D725
● snom D745

Snom D785 Specifications

General

Connectivity	Ethernet
Ethernet Ports	2 x Gigabit Ethernet
WiFi	No
USB Port	1 x USB 2.0
Wideband Audio	Yes
Protocols	SIP (RFC3261)
Display	Color display
Secondary Display	No
Lines	12
PoE	Yes
Audio	HD audio, speakerphone
Security	TLS, SRTP
Codecs	G.711, G.722, G.726, G.729
Headset Port	RJ-9
Power Supply	PoE
Resolution	480 x 272 pixels