V: 10/13/2024 - 1 ©2024 Snom Technology GmbH 14/22
Short User Manual
Using the phone
This section describes the functions of the phone with the factory default settings. If your phone was installed
and/or set up by someone else, the default settings may have been changed. Please check with that person or
company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone‘s web interface. The
default setting is
Name + Number
. You can change the setting at
Preferences > General Information > Number
Display Style
by selecting a different option from the drop-down list.
(1) Making calls
(2) Accepting calls
Using different audio devices
(3) Terminating calls
Selecting identity for current outgoing call1.
Using different audio devices2.
Handset:
Pick up the handset,
enter the phone
number, and confirm
with
Confirm
or enter the phone number and pick up the
handset.
Headset:
Enter the phone
number and press
Headset
Speakerphone:
Enter the phone
number and press
Speakerphone
Handset: Pick up the handset.
Headset:
Press
Headset
If the phone is already in headset mode, you can
also press the blinking line key.
Speakerphone:
Press
Speakerphone
or
Confirm
When using the handset: place the handset in the cradle or
When using speakerphone or a headset:
Press
Cancel
To Next Page
Loading...
