V: 10/13/2024 - 1 ©2024 Snom Technology GmbH 21/22
Short User Manual
Software update
Manual update
1. Go to Snom's Firmware Update Center and find
the latest firmware version for your phone.
2. Please read the instructions and release notes
before downloading the firmware.
3. Right-click the
download link
in the Firmware
files table and copy the link.
4. Open the phone’s web user interface (WUI) and
navigate to
Software Update
page. In the
Manual
Software Update
area, paste the link into the text
field of Firmware.
5. Click Load. The phone begins to reboot. If the
phone challenges a
Reboot?
message, please
confirm.
Note: DO NOT DISCONNECT THE POWER WHILE
THE PHONE IS REBOOTING!
Auto provisioning
1. Open the phone’s web user interface (WUI) and
navigate to the
Advanced Settings page > Update
tab
.
2. Please click on the help symbol of each line and
read the information on each setting carefully
before you configure the setting.
3. When done, click Apply. If you have the changed
the setting URL and/or the
PnP configuration
, a
reboot is required before they will take effect.
For more information, see our web page.
To Next Page
Loading...
