How to configure the Voice prompt on the A190 headset
DECT M-SERIES: HEADSET
In this Howto we would like to show you how to use the " " function of our DECT M-Series headset " ".Voice Prompt A190
Here is a picture of the headset with a description of all buttons and functions.
Menu structure.
Navigation within the voice menu:
HARDWARE KEY SHORT PRESS LONG PRSS LONG PRESS
AUX FUNCTION Enter Menu mode / Select item Exit Menu mode 2 seconds
VOLUME+ Next item
VOLUME– Previous item
To learn more about the basics of the A190 headset, please look here: .A190 - Basics
Silent mode: Silences the ringer when enabled. Does not affect the stored value of ringer volume.
On
Off
Language: Two languages are available on the headset. English and another language, selectable for the user.
English
Native
Registration: Access code (default “0000”).
Register
Deregister
Audio feedback: Choose between beeps or voice prompts (where available) as user feedback. Where no voice prompts are available,
beeps will be played, and this setting is ignored. The menu will always use voice prompts.
Voice prompts
Beeps
Tone Protection: Automatic protection against loud noises and protection from too high-volume settings with prolonged use of the
headset.
Off
Office
Quiet
Noise reduction: Enable or disable digital noise reduction.
On
Off
Equalizer: Choose between three different equalizer settings.
Normal
Bass
Treble
Auto mode: Automatic hook on when headset is removed from charger on incoming call.
On
Off
Silent charging: The headset makes no call indication (neither ringer nor LEDs) while cradled.
On: LED indication only while cradled.
Headset Deactivated: Appear disconnected, cannot receive calls while cradled.
Off: Normal mode w LED and audio while cradled.
To Next Page
Need help?
General
