10
OPERATION
Keep cool function
To avoid melting when the ice cream is not placed well in time, the following
design is supported: After the ice cream is finished and without any other
operation, the machine will start up the keep cool function automatically, which
can keep cool for ten minutes. Ten minutes later, machine will enter standby
state.
Motor self-protection function
When the ice cream becomes harder, the mixing motor might be blocked.
Then the motor protection device makes the mixing motor stop working by
detecting its temperature to ensure the life of the motor.
Controlling the Volume of the Ingredients
To avoid overflow and waste, please make sure that the ingredients do not
exceed 60% of capacity of the removable bowl (Ice cream expands when
being formed)
The Differences Among These Three Working Mode
1. Ice cream mode: the default working time is 60 minutes. The detailed
operation is instructed as above.
2. Cooling only mode, the default working time is 30 minutes. The operation
is similar with that of ice cream mode, but there isn’t mixing function.
3. Mixing only mode, the default working time is 10 minutes. The operation
is similar with that of ice cream mode, but there isn’t freezing function.
STORAGE OF ICE CREAM
Remove finished ice cream into another container using a plastic scoop or
a wooden spoon, do not use a metal scoop avoiding scratch on the inside
removable bowl.
To Next Page