IMPORTANT NOTICES
1.Read all instructions before using.
2.Ensure the voltage is compliant with the voltage range stated on the rating
label, and ensure the earthing of the socket is in good condition.
3.If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
4.Do not upend this product or incline it over a 45℃ angle.
5.To protect against risk of electric shock, do not pour water on cord, plug
and ventilation, immerse the appliance in water or any other liquid.
6.Unplug the appliance after using or before cleaning.
7.Keep the appliance 8cm from other objects to ensure the good heat
releasing.
8.Do not use the accessories which are not recommended by Manufacturer.
9.Do not use the appliance close by flames, hot plates or stoves.
10.Do not switch on the power button frequently (ensure 5min. interval at least)
to avoid the damage of compressor.
11.Metal sheet or other electric objects are not allowed to be inserted into the
appliance to avoid fire and short circuit.
12.When take out the ice cream, do not knock the barrel or edge of barrel to
protect the barrel from damage.
13.Do not switch on the power before install well the barrel or blender blade.
14.The initial temperature of the ingredients is 20±3℃.Do not put the
ingredients into freezer for pre-freeze, as it will easily make the blender
blade blocked before the ice cream is in good condition.
When using an electrical appliance, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and/or injury, including
the following:
3
To Next Page
Loading...