7 • EN
Return to contents
Quick Start Guide to Navigation
1. Take the Snooper outside so that the GPS receiver can locate
your position. This may take between 15 - 30 minutes the
first time. When satellite lock is achieved, the screen will
display your current position on its map in a ‘3D’ navigation
view. Your position (and direction) is indicated by the
icon.
Tip: To reduce the ‘cold start’ GPS time remain stationary
2. Bring up the main navigation menu by touching the centre
of the display.
Select
Find by Post Code
Tip: The icon always means that there are more options
to see on the next screen
3. You will see a standard browser screen, used for entering
postcodes. Enter the full UK postcode using the keyboard
and press
IMPORTANT: Use the key to
separate the two segments of the postcode.
To Next Page
Loading...
