SNOWJOE 24V-X2-20SB - User Manual

1
© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC Model 24V-X2-20SB Form No. SJ-24V-X2-20SB-880E-MR1
OPERATOR’S MANUAL
CORDLESS SNOW BLOWER
48-VOLT MAX* | 4.0 Ah EACH | 20-INCH | LED LIGHTS
R
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions when using cordless snow blowers. Basic
safety precautions should always be followed to reduce the
risk of re, electric shock, and personal injury.
General Safety Rules
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
• Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
• Keep bystanders away – All bystanders and pets should
be kept a safe distance away from the work area.
• Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
• Use the right product – Do not use this machine for any
job except that for which it is intended.
•
mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
• Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
• Do not force the snow blower – Use the snow blower
at the rate for which it was designed to ensure optimal
performance and safe operation.
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the snow blower when you are tired
or under the inuence of alcohol or drugs.
• Do not overreach –
Keep proper footing and balance at
all times.
• Store indoors – When not in use, the snow blower should
be kept dry and stored out of the reach of children in a high
or locked place.
• Maintain snow blower with care – Follow instructions for
lubricating and changing accessories.
mWARNING! Always disengage the switch lever and
remove the battery packs before making any adjustments,
inspecting, servicing, changing accessories, cleaning the snow
blower, or when any other dangerous conditions are present.
Any such operation should be performed after revolving parts
inside the snow blower stop completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
mWARNING! When replacing any parts, you must strictly
observe the instructions and procedures described in this user
manual. Special care should be paid to any rubber parts,
since these parts may increase the motor load and decrease
its mechanical power if damaged.
mWARNING! If you notice that the snow blower is not
running properly or hear abnormal sounds from the motor
when it is in use, immediately stop the machine, remove the
batteries, and contact your service center.
• Surfaces – This snow blower is intended for use on
paved surfaces. Do not use on gravel, stone or other
unpaved surfaces unless the snow blower is adjusted for
such surfaces according to the instructions given in the
operator’s manual.
• Moving parts present risks – Keep your face, hair,
clothing, hands, and feet away from moving parts.
All guards and safety attachments must be installed
properly before using the unit. Shut o and disconnect the
battery before touching any parts other than the handles
and switch.
• Avoid unintentional starting – Make sure the safety switch
and the switch lever are in the o position before inserting
the batteries in the unit. Do not carry the snow blower with
the safety switch and the switch lever engaged.
• Do not overreach – Maintain proper footing and balance
at all times. Place heels rmly on the ground and tightly
grasp the handle bar. Watch for uneven surfaces and do not
overreach. In case you fall or collide with the snow blower,
inspect the unit for any damages or cracks. When stepping
backwards, be careful to avoid obstacles beneath your feet
or behind you to avoid falling.
• Wear rubber boots when operating the snow blower.
• Operation of the snow blower in the hand-held position is
unsafe, except in accordance with the special instructions
for such use provided in the operator's manual.
• Keep guards in place and in working order.

Summary

Safety Instructions

General Safety Rules

Basic safety precautions and operational advice for users.

Safety Instructions

Electric Safety

Safety guidelines related to electrical hazards and usage.

Battery & Charger Safety Instructions

Guidelines for safe handling, charging, and storage of batteries and chargers.

Information about the charger and the charging process

Protection from environmental influences

Precautions to protect the tool and charger from environmental factors.

Additional Safety Instructions

Safety Instructions for Walk-Behind Snow Blowers

Specific safety advice for walk-behind snow blower operation.

Safety Instructions for Walk-Behind Snow Blowers

Clearing a Clogged Discharge Chute

Procedure for safely clearing a blocked discharge chute.

Safety Symbols

Symbols and Descriptions

Explanation of various safety symbols and their meanings.

Know Your Cordless Snow Blower

Components Overview

Identification and description of the snow blower's parts and controls.

Technical Data

Specifications

Detailed technical specifications of the snow blower.

Unpacking

Carton Contents

List of items included in the product packaging.

Battery Pack Operation

Battery Charge Level Indicator

How to check and interpret the battery charge level indicators.

Charger Operation

When to Charge the iON+ 24 VBAT Lithium-iON Batteries

Guidance on when to charge specific types of battery packs.

Charging the Batteries

Charging Process Steps

Step-by-step instructions for charging the batteries.

Charging a Hot or Cold Battery Pack

Instructions for charging batteries under non-ideal temperature conditions.

Lithium-Ion Charging Status

Table showing charging status based on battery temperature.

Assembly

Assembling the handles

Instructions for assembling the handle frames of the snow blower.

Discharge Chute Assembly

Steps for assembling the discharge chute mechanism.

Chute Crank Rod Assembly

Instructions for assembling the chute crank rod.

Operation

Starting + Stopping

Procedures for starting and stopping the snow blower.

Operating Tips

Advice and best practices for operating the snow blower.

Headlights

Information about the snow blower's headlights.

Changing Throw Direction and Throw Height

Adjusting Discharge Chute

How to adjust the direction and height of snow discharge.

Maintenance

Lifetime Lubrication (Motor + Auger)

Information on the unit's permanent lubrication.

General Maintenance Tips

General advice for maintaining the snow blower.

Replacing the Scraper Bar

Instructions for replacing the scraper bar.

Replacing the Auger Blade

Instructions for replacing the auger blade.

Proper Care for Batteries + Charger

Maintenance + Storage

Guidelines for maintaining and storing the snow blower.

Battery + Charger Off-Season Storage

Specific instructions for storing batteries and chargers during off-season.

Battery Caution + Disposal Information

Disposal Guidelines

Information and warnings regarding battery disposal.

Service + Support

Model + Serial Numbers

Location and importance of model and serial numbers.

24 VCHRG-DPC-2 Federal Communications Commission (FCC)

Class B device

FCC compliance information for Class B digital devices.

Optional Accessories

Batteries and Chargers

List of optional batteries and chargers with specifications.

Replacement Parts

List of optional replacement auger, scraper bar, and tools.

SNOW JOE + SUN JOE CUSTOMER PROMISE

OUR WARRANTY

Details of the product's limited warranty coverage.

PRODUCT REGISTRATION

Information and encouragement for product registration.

WHO CAN SEEK LIMITED WARRANTY COVERAGE

Specifies who is eligible for warranty claims.

WHAT IS NOT COVERED?

Exclusions and limitations of the product warranty.

SNOWJOE 24V-X2-20SB Specifications

General

Power Source	Battery
Battery Voltage	24V
Clearing Width	20 inches
Clearing Depth	10 inches
Throw Distance (Max)	25 feet
Runtime	up to 40 minutes
Headlight	Yes
Auger Material	Durable Plastic
Chute Rotation	180 degrees
Battery System	2 x 24V
Warranty	2 years