SNOWJOE 24V-X2-SB22 - User Manual

EN
© 2021 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC Model 24V-X2-SB22 Form No. SJ-24V-X2-SB22-880E-M
OPERATOR’S MANUAL
CORDLESS SNOW BLOWER
48V MAX* | 8.0 Ah | 22-INCH | LED LIGHTS
R
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions when using cordless snow blowers.
Basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury.
General Safety Rules
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
• Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
• Keep bystanders away – All bystanders and pets should
be kept a safe distance away from the work area.
• Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
• Use the right product – Do not use this machine for any
job except that for which it is intended.
•
mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
• Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
• Do not force the snow blower – Use the snow blower
at the rate for which it was designed to ensure optimal
performance and safe operation.
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the snow blower when you are tired
or under the inuence of alcohol or drugs.
• Do not overreach –
Keep proper footing and balance at
all times.
• Store indoors – When not in use, the snow blower should
be kept dry and stored out of the reach of children in a high
or locked place.
• Maintain snow blower with care – Follow instructions for
lubricating and changing accessories.
mWARNING! Always disengage the switch lever and
remove the battery pack before making any adjustments,
inspecting, servicing, changing accessories, cleaning the snow
blower, or when any other dangerous conditions are present.
Any such operation should be performed after revolving parts
inside the snow blower stop completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
mWARNING! When replacing any parts, you must strictly
observe the instructions and procedures described in this user
manual. Special care should be paid to any rubber parts,
since these parts may increase the motor load and decrease
its mechanical power if damaged.
mWARNING! If you notice that the snow blower is not
running properly or hear abnormal sounds from the motor
when it is in use, immediately stop the machine, disconnect
the battery, and contact your service center.
• Surfaces – This snow blower is intended for use on
paved surfaces. Do not use on gravel, stone or other
unpaved surfaces unless the snow blower is adjusted for
such surfaces according to the instructions given in the
operator’s manual.
• Moving parts present risks – Keep your face, hair,
clothing, hands, and feet away from moving parts.
All guards and safety attachments must be installed
properly before using the unit. Shut o and disconnect the
battery before touching any parts other than the handles
and switch.
• Avoid unintentional starting – Make sure the safety switch
and the switch lever are in the o position before inserting
the battery in the unit. Do not carry the snow blower with
the safety switch and the switch lever engaged.
• Do not overreach – Maintain proper footing and balance
at all times. Place heels rmly on the ground and tightly
grasp the handle bar. Watch for uneven surfaces and do not
overreach. In case you fall or collide with the snow blower,
inspect the unit for any damages or cracks. When stepping
backwards, be careful to avoid obstacles beneath your feet
or behind you to avoid falling.
mWARNING! If the snow blower strikes any object,
follow these steps:
i) Stop the snow blower. Remove the battery.
ii) Inspect for damage.
iii) Repair any damage before restarting and operating
the snow blower.

Summary

Safety Instructions

General Safety Rules

Basic safety precautions for reducing fire, electric shock, and personal injury risks.

Critical Operational Warnings

Key safety alerts including disengaging the switch lever, part replacement, and abnormal operation.

Battery & Charger Safety Instructions

Safe Battery and Charger Handling

Guidelines for safely charging, using, and storing batteries and chargers to prevent injury and damage.

Battery and Charger Information

Battery Information and Care

Details on battery performance, aging, storage, and disposal considerations.

Charger Operation and Process

Instructions for using the charger, charging times, and status indicators.

Additional Safety Instructions

Walk-Behind Snow Blower Safety

Specific safety precautions for operating walk-behind snow blowers, including inspections and hazards.

Environmental Protection and Hazards

Guidance on protecting the tool and battery from moisture, temperature, and other environmental factors.

Specific Safety Procedures

Clearing a Clogged Discharge Chute

Procedure for safely clearing a clogged discharge chute using the provided tool.

Electrical Safety Precautions

Precautions related to electrical hazards and avoiding accidental starting.

Product Overview

Component Identification and Technical Data

Illustration and specifications of the snow blower components and performance data.

Unpacking and Battery Management

Carton Contents and Unpacking

List of items included in the package and instructions for unpacking the snow blower.

Battery Pack Operation and Indicators

Information on using battery packs, their charge level indicators, and power requirements.

Assembly Guide

Assembling the Frames

Step-by-step instructions for connecting the different frame components of the snow blower.

Discharge Chute Assembly

Instructions for assembling and adjusting the discharge chute and deflector.

Chute Crank Assembly

Detailed steps for assembling the chute control cranks for directional and height adjustment.

Operation

Starting and Stopping Procedures

Instructions for safely starting and stopping the snow blower using the controls.

Operating Tips and Best Practices

Guidance for efficient and safe snow blowing, including handling conditions and wind direction.

Headlight Functionality

Information on how the headlights operate to illuminate the path during use.

Changing Throw Direction and Height

Instructions for adjusting the discharge chute direction and snow throwing height.

Maintenance

General Maintenance Tips

Guidelines for regular checks, cleaning, and upkeep of the snow blower.

Proper Care for Batteries and Charger

Instructions for cleaning, maintenance, and off-season storage of batteries and chargers.

Battery Caution and Disposal

Important warnings and procedures for the safe disposal of battery packs.

Service and Support

Contacting Service and Support

Information on how to get service or support for the snow blower.

Model and Serial Numbers

Location and importance of recording model and serial numbers for service.

Federal Communications Commission (FCC)

FCC compliance information regarding radio frequency energy and interference.

Accessories

Authorized Replacement Parts and Accessories

List of recommended accessories and parts for the snow blower.

SNOWJOE 24V-X2-SB22 Specifications

General

Brand	SNOWJOE
Model	24V-X2-SB22
Category	Snow Blower
Language	English