SNOWJOE 24V-X2-SB18U - User Manual

1
© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe
®
, LLC Model 24V-X2-SB18U Form No. SJ-24V-X2-SB18U-880E-M
OPERATOR’S MANUAL
CORDLESS SNOW BLOWER
48V MAX* | 4.0 Ah EACH | 18-INCH | LED LIGHT
R
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions when using cordless snow blowers. Basic
safety precautions should always be followed to reduce the
risk of re, electric shock, and personal injury.
General Safety Rules
Notice the personal safety alert symbol m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
• Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
• Keep bystanders away – All bystanders and pets should
be kept a safe distance away from the work area.
• Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
• Use the right product – Do not use this machine for any
job except that for which it is intended.
• mCAUTION! – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
• Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
• Do not force the snow blower – Use the snow blower
at the rate for which it was designed to ensure optimal
performance and safe operation.
• Stay alert – Watch what you are doing. Use common
sense. Do not operate the snow blower when you are tired
or under the inuence of alcohol or drugs.
• Do not overreach – Keep proper footing and balance at
all times.
• Store indoors – When not in use, the snow blower should
be kept dry and stored out of the reach of children in a high
or locked place.
• Maintain snow blower with care – Follow instructions for
lubricating and changing accessories.
mWARNING! Always disengage the switch lever and
remove the battery packs before making any adjustments,
inspecting, servicing, changing accessories, cleaning the snow
blower, or when any other dangerous conditions are present.
Any such operation should be performed after revolving parts
inside the snow blower stop completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
mWARNING! When replacing any parts, you must strictly
observe the instructions and procedures described in this user
manual. Special care should be paid to any rubber parts, since
these parts may increase the motor load and decrease its
mechanical power if damaged.
mWARNING! If you notice that the snow blower is not
running properly or hear abnormal sounds from the motor
when it is in use, immediately stop the machine, remove the
batteries, and contact your service center.
• Surfaces – This snow blower is intended for use on
paved surfaces. Do not use on gravel, stone or other
unpaved surfaces unless the snow blower is adjusted for
such surfaces according to the instructions given in the
operator’s manual.
• Moving parts present risks – Keep your face, hair,
clothing, hands, and feet away from moving parts.
All guards and safety attachments must be installed
properly before using the unit. Shut o and disconnect the
batteries before touching any parts other than the handles
and switch.
• Avoid unintentional starting – Make sure the safety lock
button and the switch lever are in the o position before
inserting the batteries in the unit. Do not carry the snow
blower with the safety lock button and the switch lever
engaged.
• Do not overreach – Maintain proper footing and balance
at all times. Place heels rmly on the ground and tightly
grasp the handle bar. Watch for uneven surfaces and do not
overreach. In case you fall or collide with the snow blower,
inspect the unit for any damages or cracks. When stepping
backwards, be careful to avoid obstacles beneath your feet
or behind you to avoid falling.
• Wear rubber boots when operating the snow blower.
• Operation of the snow blower in the hand-held position is
unsafe, except in accordance with the special instructions
for such use provided in the operator's manual.
• Keep guards in place and in working order.

Summary

Safety Instructions

General Safety Rules

Basic safety precautions for operating the snow blower.

Key Operational Warnings

Critical warnings regarding operation, adjustments, and abnormal conditions.

Electric Safety

Prevent Unintentional Starting

Ensuring the switch is off before handling the appliance.

Battery Pack Safety Precautions

Guidelines for safe handling and use of battery packs.

Electric Safety

Battery Chemical Hazards

Precautions for handling battery chemical leaks and exposure.

Battery Damage and Mishandling

Warnings against using damaged or improperly handled battery packs.

Battery & Charger Safety Instructions

Use Designated Battery Packs

Using only authorized battery packs to prevent injury and fire risks.

Charger and Charging Process Information

Charger Cord Protection

Keeping the charger and cord away from heat, oil, and sharp edges.

Charging Temperature Guidelines

Warning against charging batteries in freezing temperatures.

Protection from Environmental Influences

Work Attire and Protection

Recommending appropriate clothing and eye protection.

Walk-Behind Snow Blower Safety

Operators Manual Review

Emphasizing understanding the manual for safe operation.

Pre-Operation Unit Inspection

Thoroughly inspecting the unit for secure and correct parts before use.

Clearing a Clogged Discharge Chute

Impeller Contact Hazard

Warning about injury from impeller contact and how to safely clear the chute.

Safety Symbols Explained

Manual and Safety Alert Symbols

Symbols indicating the need to read the manual and general safety alerts.

Personal Protective Equipment Symbols

Symbols indicating required protective gear like goggles and gloves.

Know Your Cordless Snow Blower

Unpacking Instructions

Carton Contents

List of items included in the snow blower packaging.

Charger Operation

When to Charge Batteries

Guidance on when to charge the specific battery model.

Battery Charging Process

Step-by-step instructions for charging the batteries.

Assembly Instructions

Assembling the Handles

Detailed steps for assembling the snow blower handles.

Discharge Chute Assembly

Chute Deflector Attachment

Instructions for attaching the chute deflector.

Operation

Starting and Stopping Procedures

Procedures for safely starting and stopping the snow blower.

Operating Tips

Area Preparation and Safety

Advice on clearing the work area to prevent injury from thrown objects.

Wind Direction and Snow Throwing

Guidance on using wind direction for efficient snow throwing.

Headlights

LED Light Usage

Information on using the integrated LED light for forward illumination.

Changing Throw Direction and Height

Safe Discharge Chute Direction

Crucial warning about directing the discharge chute safely.

Chute Direction Control

Instructions for controlling the chute direction.

Maintenance

General Maintenance Guidelines

General advice and warnings for performing maintenance tasks.

Replacing the Scraper Blade

Scraper Blade Replacement Safety

Steps to safely turn off and prepare for scraper blade replacement.

Replacing the Auger Blades

Auger Blade Removal Procedure

Procedure for detaching auger blades using hardware.

Proper Care for Batteries and Charger

Battery and Charger Liquid Hazard

Warnings about liquid exposure and disassembly of battery components.

Storage Procedures

Pre-Storage Machine Preparation

Advice on running the machine to prevent auger freezing during storage.

Battery and Charger Off-Season Storage

Protecting Batteries and Charger from Elements

Instructions for protecting battery packs and chargers from moisture and damage.

Battery Caution and Disposal Information

Battery Disposal Regulations

Guidance on proper battery disposal and recycling.

Federal Communications Commission (FCC)

FCC Warning on Modifications

Warning against unauthorized modifications to the equipment.

Optional Accessories

24 V ION+ 4.0 Ah Battery

Details on the 4.0 Ah battery, including charge and runtime.

24 V ION+ 5.0 Ah Battery

Details on the 5.0 Ah battery, including charge and runtime.

24 V ION+ Lithium-Ion Charger

Information about the quick charger accessory.

Replacement Parts and Accessories

18-inch Replacement Auger

Information on the replacement auger accessory.

Protection Cover

Details on the snow blower protection cover accessory.

Customer Promise and Warranty

Product Warranty Details

Details of the limited warranty for Snow Joe products.

Product Registration Information

Encouragement and methods for product registration.

Warranty Coverage Eligibility

Defines who is eligible for warranty coverage.

Warranty Exclusions

Outlines exclusions and limitations of the warranty.

SNOWJOE 24V-X2-SB18U Specifications

General

Power Source	Battery
Battery Voltage	24V
Battery Type	Lithium-Ion
Battery Included	Yes
Brushless Motor	Yes
Clearing Width	18 inches
Headlights	Yes
Self-Propelled	No
Cutting Depth	10 inches
Intake Height	10 inches
Throwing Distance (max)	20 ft (6 m)
Chute Rotation	180°
Battery System	2 x 24V