24
Sensor Selection: You can select which sensor should be used. You can
Floor Temp Limit:
(default is 27
Note: The Air Sensing Only Mode must not be used for controlling
electric underoor heating under wood / vinyl
oor coverings. Only oor sensors are available or both
(Remote Air and Floor Sensor) should be used.
Optimum Start: This function will calculate how much time the heated
space needs, to ensure the required temperature you have set, at the time
you have set, is achieved (assuming the heating system has been installed
system needs to operate to achieve this setting. This time is calculated by
To Next Page
Loading...