Need help?Do you have a question about the snug SnugStat and is the answer not in the manual?
General| Brand | snug |
|---|---|
| Model | SnugStat |
| Category | Thermostat |
| Language | English |
Explains the function and purpose of a programmable thermostat in controlling heating systems.
Allows time and temperature settings for programmed heating schedules.
Allows time-only settings to switch heating ON or OFF, ignoring temperature.
Guides users through connecting the SnugStat thermostat to the mobile application.
Shows Wi-Fi connection status on the thermostat display.
Displays status for temporary temperature overrides or manual heating boosts.
Indicates when optional settings are being adjusted on the display.
Shows the current day of the week and the time.
Indicates when the thermostat is in 'Away' mode for energy saving.
Shows when the 'Optimum Start' feature is active or selected.
Displays the current relative humidity level in the room.
Indicates whether the thermostat unit is powered on or off.
Shows when the thermostat is set to operate in 'Holiday' mode.
Indicates active programming or ON/OFF heating cycles.
Represents the button used to access setup menus and settings.
Shows the interface for adjusting the target temperature.
Displays the desired temperature set by the user.
Shows the current measured room temperature.
Displays the selected unit for temperature readings.
Indicates when the heating system is actively running.
Details how to program the SnugStat thermostat in its primary operating mode.
Explains the different scheduling options available for the thermostat.
Covers units, switching differentials, and time delay for heating calls.
Explains the setup for 'Away' and 'Defrost' temperature maintenance.
Guides on choosing sensors and setting floor temperature limits.
Describes how the thermostat calculates optimal heating start times.
Explains temperature rise calculation and display dimming features.
Instructions for setting the device language and geographical time zone.
Covers setting the internal clock and adjusting display backlight options.
How to set the duration before the screen enters standby mode.
How to enable screen lock and choose temperature units (°C/°F).
How to set minimum and maximum temperature limits for operation.
How to set the temperature for when the property is unoccupied.
How to set the temperature for frost protection when the unit is off.
Guides on choosing sensors and setting floor temperature limits.
How to enable automatic adjustment for daylight saving.
Steps to program ON/OFF times for the time-clock mode.
How to temporarily override programmed times for heating.
How to view system status and information on the thermostat.
Procedure to restore the thermostat to its original factory configuration.
Illustrates the wiring connections for electric underfloor heating systems.
Shows the wiring for wet underfloor heating systems in a single zone.
Illustrates wiring configurations for hot water and timer-only modes.
To Next Page