Socket 1D - Page 86

86
Scanner Settings - Symbologies
1. In Scanner Settings, click Menu | Symbologies. Press the space bar to enable or disable
symbologies.
Enabling all possible symbologies will make the decode process slightly longer.
The RSS symbology is now known as GS1 DataBar.
If you would like to read UPC-A symbols, be sure to disable GS1 DataBar so that
GS1 DataBar symbols don’t get mistakenly decoded.
2. After entering any settings, click Menu | Save.
Scanner Settings - Test
1. In Scanner Settings, click Menu | Test.
2. Select the data format as either ASCII or hexadecimal. Scan a barcode. The Scan Window
will report the barcode’s symbology, data length, and data content.