Socket SocketScan S730 - Sound Indicators

STATUS INDICATORS (CONTINUED)
Sound Pattern Sound Meaning
Low-High Tone Power On
High-Low Tone Power O
2 Even Tones Scanner detects adequate power supply
1 Low Beep (When the power button is double tapped) Scanner
has toggled on-screen keyboard or keyboard toggle
feature is enabled. (iOS devices only)
1 Beep Scanner connected to device and is ready to scan
barcodes
1 Beep Data successfully scanned
2 Beeps (same
tone)
Scanner disconnected
1 Long Beep Scanner gave up searching for a host device
3 Beeps (escalat-
ing tone)
Scanner has been recongured
(the command barcode was scanned successfully)
3 Beeps (escalat-
ing tone followed
by long tone)
The command barcode did NOT work! (Verify if the
command barcode used is valid for the congura-
tion of your scanner. Then try again)
3 Beeps, followed
by 5 beeps)
Factory reset barcode was scanned, OR, scanner
performed factory reset
27