Socket SocketScan S730 - Beep Settings Command Barcodes

Important! Make sure the Scanner is not connected to a host
computer or device before scanning a command barcode!
Beep Settings
Beep after scanner
Decodes Data ON
(default)
Enables scanner to
beep to indicate
successful scans.
#FNB0119E000100030078004B#
Beep after scanner
Decodes Data OFF
Disables scanner
from beeping to
indicate successful
scans.
#FNB01190E000100000078004B#
47
COMMAND BARCODES (CONTINUED)