MACHINE
1.Manually put raw material to machine for EF-AC / 80 type which clamp
materials, feed, retraction automatically, processing speed, good
accuracy, can trim the end face of the workpiece. The inner and outer
chamfering are completed in a chamfering process
2.The workpiece clamping mould and knife block are precision
engineered to ensure the perfect quality of its processing.
3.This machine is assembled with standard baldes so that it is simpler
and faster to replace blades.
4.Upon receipt of the product, please check the following accessories
are ready：
（1）EF-AC / 80 a chamfering machine
（2）an adujstable blade knife
（3）three clamping material moulds
（4）wrenches
To Next Page
Loading...