30
Errors Solution
If the belt is exposed to rain or washed within 24 hours, or if the vehicle is running at operating temperature within four hours,
do not try to check the belt tension. Allow the vehicle to cool to indoor temperature before measuring the belt tension. If when
the conveyor belt is damaged or malfunctions, the vehicle has been running for more than 5,000 miles (8,000 kilometers), the
conveyor belt and two pulleys need to be replaced as a whole. Some types of new belts have a layer of color. After a period of
use, the color layer will wear out until it disappears, which does not affect the use and life of the belt. Reminder: The belts and
pulleys need to be replaced by professionals, please contact after-sales service or dealers.
COMMON PROBLEMS AND TROUBLESHOOTING METHODS
c. Belt wear analysis fault phenomenon
Internal tooth crack (hair-like)
External tooth crack
Missing teeth
Edges with blurred core
Debris (not serious)
Belt groove wear
Damage caused by stone
Slope wear (outer edge only)
It can run, but its condition should be checked
Replace belt
Replace belt
It can run, but its condition should be checked
It can run, but its condition should be checked
Replace belt
If the damage is on the edge, replace the belt
It can run, but its condition should be checked
To Next Page
Loading...
