socomec 4829 0203 - LED Display; Navigation

11EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
5.4. LED display
ALARM* (red)
- Off: no active alarm
- Stable: at least one alarm (measurement, logical, protection) is active on the
display or a connected device
- Flashing: at least one system alarm is active on the display or a connected
device
*Go to the EVENTS menu for details on active alarms
COM (orange)
- Off: display is not communicating with downstream devices
- Stable: address conicts during auto-discovery process
- Flashing: communication in progress with a downstream device (RS485 or
Digiware)
ON (green)
- Off: display is not powered
- Stable: device is powered
5.5. Navigation
Press for 3 sec.
LOADS
MEASUREMENTS VOLTAGES LOAD PHASE-NEUTRAL
INPUTS/OUTPUTS CURRENTS PHASE-PHASE LOAD
PROTECTION POWERS NET. FREQUENCY
EVENTS . . .
PARAMETERS
. . . . . .