Need help?Do you have a question about the socomec ATI 250 A and is the answer not in the manual?
General| Rated Current (In) | 250 A |
|---|---|
| Rated operational voltage | 690 VAC |
| Altitude | 2000 m |
| Pollution degree | 3 |
| Rated insulation voltage | 1000 V |
| Storage temperature | -40 to +85 °C |
| Relative humidity | 95% |
Overview of product capabilities for source monitoring, transfer, metering, and error information.
Describes the new motorized changeover switch, its components, and features.
Details factory and loose options available for the ATI transfer panel, with option codes.
Initial steps for enclosure installation, including shroud removal and protection.
Details power cable connections for various ratings with bottom cable entry.
Details power cable connections for various ratings with top cable entry.
Details available options like Metering, IP54, Solid Neutral, Lightning protection, Communication.
Details the available voltage options and configurations for ATI transfer panels.
Explains voltage sensing kit use for power and sensing connections to the electronic module.
Introduces the electronic module, its front panel, and controls for basic operation.
Describes how to access programming mode, menus, and modify parameters.
Explains Manual and Automatic modes, including sequences and testing.
Introduces the electronic module, its front panel, and controls for metering product use.
Details the architecture and navigation of programming menus for metering functions.
Explains product metering features, value definitions, and display.
Lists parameters for display via Function 3, including address, variable, and units.
Explains the command to save programming parameters and diagnostic zone information.
Provides dimensions and reference numbers for enclosure parts like front cover and brackets.
Lists part numbers for various components like modules, kits, keys, and transformers.
Provides troubleshooting steps for common symptoms like operation availability and LED status.
Details troubleshooting for transfer failures to genset or mains, and running issues.
To Next Page
